The Belle Terre
Belle Terre, Suffolk County
The Belle Terre hood embodies simple elegance, featuring a refined silhouette inspired by the quiet sophistication of Long Island’s North Shore. Clean lines and balanced proportions allow the craftsmanship of quality materials to be focal point for this design.
Shown as a rendering
The Belle Terre hood embodies simple elegance, featuring a refined silhouette inspired by the quiet sophistication of Long Island’s North Shore. Clean lines and balanced proportions allow the craftsmanship of quality materials to be focal point for this design.
Designed for 8-9’ ceiling heights and 30”-50” ranges.
Request a quote for this build
Everything except the notes is required. Your selections are sent with the message.
Design details
Simple straight crown. Curved body that transitions into the apron. Brass accent base on steel models.
4 model sizes · 5 finishes · from $5,539
Discuss The Belle TerreFinishes
Brushed stainless steel
Brushed brass trim
75% antiqued cloudy stainless steel
Brushed brass trim
Powder coated steel
Brushed brass trim
- Black
- White
- Alabaster
Shown in White
Brushed brass
25% cloudy antiqued copper
Design renderings. Physical samples are available to review before selecting a finish.
Models and starting prices
Model names refer to hood width, not range width. These sizes were developed around standard ranges and ceiling heights. The ceiling heights shown are planning references; our team will review your range, available space, and installation requirements before confirming the selection.
| Model | Width (A) | Height (B) | Depth (C) | Crown width (D) | Clearance (E) | Crown height (F) | Apron height (G) | Ceiling height | Insert | Starting at |
|---|---|---|---|---|---|---|---|---|---|---|
| 32" | 31-1/2" | 26" | 21" | 19-1/2" | 34" | 1" | 4-1/2" | 8' | Zephyr 30" | $5,539 |
| 38" | 38" | 27" | 24-1/4" | 24-1/2" | 33" | 1" | 5" | 8' | Zephyr 36" | $6,359 |
| 42" | 42" | 36" | 24-1/4" | 25-1/2" | 36" | 1-1/2" | 6" | 9' | Zephyr 36" | $7,449 |
| 50" | 49-1/2" | 36" | 24-1/4" | 30" | 36" | 1-1/2" | 6" | 9' | Zephyr 46" | $8,424 |
Starting prices vary by model and finish. Speak with our team to confirm your selection and receive a project-specific quote.
Ask for a quotation
Dimensions
The letters on the elevation match the columns in the table above. Monarch's spec sheet carries the same drawing with the finishes and the full size table on one page.
The Belle Terre spec sheet (PDF)Choose from the collection finishes
The brushed brass version presents the silhouette in one warm metal. Steel options introduce contrast at the base, while powder-coated finishes offer a painted-color appearance with brass trim.
Samples can be viewed by local appointment or mailed, so you can review the finish beside the other materials in your kitchen.
Questions about the Belle Terre
Yes. Brushed brass is one of the set collection finishes.
Yes. The steel designs feature the Belle Terre's brass accent base, as shown in the finish options.
The collection dimensions and finish combinations are fixed. Changes outside the offered options would be considered as a custom request with additional costs.
Yes. Samples can be mailed. Contact the team with your preferred finishes and project location to arrange them.
Discuss the Belle Terre for your kitchen
Share your range model, room dimensions, and finish direction with Kaitlin and Brendan. They will review the available choices with you before confirming a quote.
Collection sizes, finishes, and detailing are fixed. Requests outside the offered options are handled through our custom hood service and involve additional costs.