The Northport
Northport, Suffolk County
The Northport Luxe features a meticulously detailed double-tube strap apron, complemented by vertical strapping that follows the contours of the edge. This adds depth, dimension, and visual intrigue.
Shown as a rendering
Inspired by Northport’s historic harbor village, shipbuilding heritage, legacy of craftsmanship, and distinctive waterfront architecture. The Northport brings the character of a coastal village into the home. Contoured metal bands with a thin, elegant apron create balance and proportion, while its graceful curves soften the design with a distinctly coastal character. Elegant yet understated this hood is designed to feel equally at home in a refined traditional kitchen or a light, contemporary space.
Designed for 8-9’ ceilings and 30”-50” ranges. Works well in kitchens with soffits and coves.
The Northport Luxe and Refined
The same silhouette, drawn two ways. Compare them here, then read the detail further down the page.
The Northport Luxe
4 models · from $6,559
The Northport Luxe features a meticulously detailed double-tube strap apron, complemented by vertical strapping that follows the contours of the edge. This adds depth, dimension, and visual intrigue.
See the Luxe
The Northport Refined
4 models · from $6,079
The Northport Refined is a streamlined interpretation of the Northport Luxe. It retains the graceful convex body and sweeping character of the Luxe, while simplifying the apron detail to create a cleaner appearance while preserving the distinctive character and proportions of the original design.
See the RefinedRequest a quote for this build
Everything except the notes is required. Your selections are sent with the message.
The Northport Luxe
The Northport Luxe features a meticulously detailed double-tube strap apron, complemented by vertical strapping that follows the contours of the edge. This adds depth, dimension, and visual intrigue.
Luxe details
Convex curved body. Contoured bands. Tube-band apron detailing. Proportions developed for lower ceilings, soffits, and coves.
4 model sizes · 5 finishes · from $6,559
Discuss the LuxeLuxe finishes
Brushed stainless steel
Brushed brass trim
Brushed stainless steel
High polished steel trim
Powder coated steel
Brushed brass trim
- Black
- White
- Alabaster
Shown in White
Matte brass
Brushed brass trim
Brushed steel with honeycomb patina
Brushed brass trim
Design renderings. Physical samples are available to review before selecting a finish.
Luxe models and starting prices
Model names refer to hood width, not range width. These sizes were developed around standard ranges and ceiling heights. The ceiling heights shown are planning references; our team will review your range, available space, and installation requirements before confirming the selection.
| Model | Width (A) | Height (B) | Depth (C) | Crown width (D) | Clearance (E) | Crown height (F) | Apron height (G) | Ceiling height | Insert | Starting at |
|---|---|---|---|---|---|---|---|---|---|---|
| 32" | 32" | 24" | 22" | 20" | 36" | 2-1/2" | 2-3/4" | 8' | Zephyr 30" | $6,559 |
| 38" | 38" | 28" | 24-1/2" | 23-3/4" | 32" | 2-1/2" | 2-3/4" | 8' | Zephyr 36" | $7,539 |
| 42" | 42" | 36" | 24-1/2" | 27-1/2" | 36" | 2-1/2" | 2-3/4" | 9' | Zephyr 36" | $8,469 |
| 50" | 50" | 36" | 24-1/2" | 32" | 36" | 2-1/2" | 2-3/4" | 9' | Zephyr 42" | $9,399 |
Starting prices vary by model and finish. Speak with our team to confirm your selection and receive a project-specific quote.
Ask for a quotation
Luxe dimensions
The letters on the elevation match the columns in the table above. Monarch's spec sheet carries the same drawing with the finishes and the full size table on one page.
The Northport Luxe spec sheet (PDF)The Northport Refined
The Northport Refined is a streamlined interpretation of the Northport Luxe. It retains the graceful convex body and sweeping character of the Luxe, while simplifying the apron detail to create a cleaner appearance while preserving the distinctive character and proportions of the original design.
Refined details
Convex curved body. Single apron band. Proportions developed for lower ceilings, soffits, and coves.
4 model sizes · 5 finishes · from $6,079
Discuss the RefinedRefined finishes
Brushed stainless steel
Brushed brass trim
Brushed stainless steel
High polished steel trim
Powder coated steel
Brushed brass trim
- Black
- White
- Alabaster
Shown in White
Matte brass
Brushed brass trim
Brushed steel with honeycomb patina
Brushed brass trim
Design renderings. Physical samples are available to review before selecting a finish.
Refined models and starting prices
Model names refer to hood width, not range width. These sizes were developed around standard ranges and ceiling heights. The ceiling heights shown are planning references; our team will review your range, available space, and installation requirements before confirming the selection.
| Model | Width (A) | Height (B) | Depth (C) | Crown width (D) | Clearance (E) | Crown height (F) | Apron height (G) | Ceiling height | Insert | Starting at |
|---|---|---|---|---|---|---|---|---|---|---|
| 32" | 32" | 24" | 21-1/2" | 20-1/8" | 36" | 2-1/2" | 2" | 8' | Zephyr 30" | $6,079 |
| 38" | 38" | 28" | 24" | 23-7/8" | 32" | 2-1/2" | 2" | 8' | Zephyr 36" | $7,144 |
| 42" | 42" | 36" | 24" | 27-1/2" | 36" | 2-1/2" | 2" | 9' | Zephyr 36" | $7,474 |
| 50" | 50" | 36" | 24" | 32" | 36" | 2-1/2" | 2" | 9' | Zephyr 42" | $8,454 |
Starting prices vary by model and finish. Speak with our team to confirm your selection and receive a project-specific quote.
Ask for a quotation
Refined dimensions
The letters on the elevation match the columns in the table above. Monarch's spec sheet carries the same drawing with the finishes and the full size table on one page.
The Northport Refined spec sheet (PDF)Finish combinations for both versions
- Brushed stainless steel with brushed brass trim.
- Brushed stainless steel with high-polished steel trim.
- Matte brass with brushed brass trim.
- Brushed steel with honeycomb patina and brushed brass trim.
- Powder-coated steel with brushed brass trim: Black, White, or Alabaster. White is shown in the rendering.
Review physical samples by local appointment or request samples by mail.
Questions about the Northport
Both have the Northport's convex body. Luxe adds tube-band apron details; Refined uses a single apron band for a simpler lower edge.
The design was developed with lower ceilings, soffits, and coves in mind, but fit needs to be checked for your kitchen. Share the available height, range model, and cabinetry details with our team.
Black, White, and Alabaster are the fixed collection choices. A different color would be a custom request with additional costs.
Review the Northport with our team
Let us know whether you prefer Luxe or Refined, along with your kitchen dimensions and finish direction. We will discuss the available models, sample arrangements, and project-specific quote.
Collection sizes, finishes, and detailing are fixed. Requests outside the offered options are handled through our custom hood service and involve additional costs.